Today, we will look at the causes, symptoms, and solutions for E101, C101, ER01, EA01, E1, E2, E3, E4, E5 errors among Samsung air conditioner error codes.
If you know the air conditioner error code and malfunction symptoms in advance in hot summer, you can take preemptive measures before calling an AS driver.
It is necessary to prepare in advance to prevent the unfortunate event that the air conditioner is broken and cannot be turned on until the AS reservation date is received.
Error code: E101, C101, ER01, EA01
Cause Outdoor unit power cut off, poor communication between air conditioner and outdoor unit
Symptom An error appears on the display and the product does not operate.
Solution “Check if the outdoor unit power is connected, and check if the breaker in the air conditioner unit is not tripped.
If there is no problem on the power side, the problem is caused by communication failure between the air conditioner and the outdoor unit. 삼성 에어컨 에러코드
At this time, please reset the air conditioner.”
If the error code persists even after taking the above solutions, it is necessary to apply for a business trip to the AS center. 좋은뉴스
Error code: E2, E4
Cause Occurs when the front shutter of the air conditioner malfunctions
Symptom The shutter does not close or open and this error appears on the display.
Solution “Check if there is a foreign substance stuck in the door and remove it.
Turn off the power, then plug it back in after 1-2 minutes and restart it.”
If the error persists even after taking the above measures, you need to contact the A/S center.
Error Code : E1
Cause “This error code is displayed when a communication problem occurs between the indoor unit and the outdoor unit.
It occurs when the wire of the terminal connected to the outdoor unit is disconnected or the power to the outdoor unit is cut off.”
Symptom The indoor unit does not operate due to poor communication.
Solution “Turn off both indoor and outdoor unit power, then turn on the power again after 5 minutes and try again.
Then reset it and see if the error comes back. ”
If the error occurs again after the above measures, you need to contact the after-sales service center.
Error code: E3
Cause This error occurs for reasons such as defective fan motor, defective fan motor rotation sensor, panel button continuous input error, defective sensor PCB, defective shutter motor, etc.
The indoor unit stopped working with the E3 code displayed on the symptom display.
Solution: “Turn off the power, connect the power again after 2 minutes, and check if the error code reappears when you try again.
If the problem persists, it is necessary to repair or replace accessories such as sensor PCB and shutter motor. ”
If the error code persists even after taking the above solutions, it is necessary to apply for a business trip to the AS center.
Error Code : E5
Cause This is an error code that occurs when the indoor unit fan does not operate properly due to a temperature sensor short or open.
Symptom E5 error appears on the display and operation stops.
Solution “It is necessary to replace the temperature sensor part of the indoor pipe and check the main PCB.
AS inquiry required.”
If the error persists even after taking the above measures, you need to contact the A/S center.
For more details, please refer to the Samsung Electronics Customer Service Center website below.
https://www.samsungsvc.co.kr/