Surprisingly, many people don’t know that a toilet bidet has a filter.. Since a bidet uses water like a water purifier, a filter is included, but usually one filter is included. Oh, and there are also bidets without a filter, depending on the manufacturer’s model. However, most bidets are equipped with one filter.
Then, how should the bidet filter be replaced? Of course, if you are using a rental bidet service, you do not have to replace the filter yourself, but an expert will visit your home and provide services such as filter replacement or cleaning and sterilization according to the maintenance cycle of about 4 months.
How to replace the antibacterial MF filter
The lifespan of the antibacterial MF filter in the bidet is about 4 months, but the lifespan varies slightly depending on the installation conditions or usage environment. If the filter is not replaced for a long time, product defects may occur due to filter clogging. You must make sure to keep it.
1. Unplug the bidet and close the middle valve at the bottom of the toilet. 비데 필터 교환
2. After removing the used filter from the T-type valve, turn the water supply hose from the filter to the left to separate it. 좋은뉴스
3. Screw the newly purchased filter to the right into the T-type valve.
4. Open the middle valve a little and let the water pass through the filter for about 1~2 minutes, then close the middle valve again.
※At this time, be careful as the floor or body may get wet from flowing water.
5. Connect the water hose to the filter.
6. After connecting the intermediate valve, insert the power plug into the outlet.
※Check again if there is water leaking from the connection part.
8. After replacing the bidet filter, check if the bidet operates normally.